| |
QSC Loudspeaker DSP Voicing Configurations
Located below are a number of signal processing files for use with QSC's
DSP products. This data is intended to optimize the performance of QSC loudspeaker
products. The files are individually downloadable and in ZIP format.
These files and voicings are subject to change without notice and
QSC does not guarantee their performance when used with non-QSC loudspeakers
or DSP products.
AcousticDesign AD-S282H / ISIS I-282H
Loudspeaker Signal Processor Settings |
|
AD-S282/ I-282H Biamp (Venue
Manager) |
Venue Manager file for bi-amplification of AD-S282H
or ISIS I-282H. Low shelf filter may be used to adjust bass
balance (boost for more bass, cut for vocal/paging applications.) |
| AD-S282/
I-282H Biamp (Signal Manager) |
Signal Manager file for bi-amplification of AD-S282H or ISIS
I-282H. Low shelf filter may be used to adjust bass balance
(boost for more bass, cut for vocal/paging applications. For
DSP-3, DSP-4, DSP-30) |
|
ILA Line Array
Loudspeaker Signal Processor Settings
These files are compatible with QSControl.net Venue Manager
|
|
WL115-sw Sub universal |
The BASIS macro described in this document is
intended for the WL115-sw sub woofer. It is intended to be a
‘universal’ sub macro--it contains user settable
equalizer blocks for tailoring the response to the requirements
of common array configurations. |
| WL2082-i
Triamp Left/Right |
The BASIS macro described in this document is intended for
use with tri-amplified ILA line arrays. This macro is intended
to be used in a Left/Right configuration. It was created with
a 4 box configuration. For different configurations use the
contour filter block to adjust. |
|
| |
WideLine-8
Loudspeaker Signal Processor Settings
These files are compatible with QSControl.net Venue Manager
|
| WL3082 |
This Venue Manager macro is intended for use with tri-amplified
WL3082 line arrays. It was developed on a 4 box array. The contour
EQ block should be used to adjust the frequency response for
array configuration and local venue conditions. |
| WL212-sw |
This Venue Manager macro is intended for use with the WL212-sw
subwoofer when used in conjuction with WL3082 line arrays. |
| |
WideLine-10
Loudspeaker Signal Processor Settings
These files are compatible with QSControl.net Venue Manager
|
| WL2102 triamp
|
This macro file is to be used with any QSControl.net family
of signal processors (Basis XXXxx, RAVE XXXxx, DSP XXXxx) to
process a WideLine-10 array in tri-amp mode. This new file incorporates
Intrinsic Corrective Filtering™ for an average sized array,
but will work equally well (with minor HF amplitude adjustment
up or down) on bigger or smaller arrays. The file is designed
for use with equal gain on all amplifier channels. However,
gain adjustments may need to be made for systems utilizing various
amplifier types and/or models. |
|
WL2102 biamp |
This macro file is to be used with a Basis family
signal processor to process a WL2102-X array in bi-amp mode.
The file was developed on a 4 box array, but should work with
minor system EQ adjustment on most arrays. The file is designed
for equal gain on all amplifier channels, gain adjustments should
be made for systems with different amplifier channel gain and/or
amplifiers in bridged mode. Polar response near 1100 Hz is slightly
asymmetric, a tradeoff made to increase beamwidth. Best coverage
can be obtained by placing MF drivers to the outside of the
listening space. |
| WL218-sw Sub |
This macro file is to be used with a Basis family signal processor
to process WL218-SW subwoofers. The file was developed on a
single cabinet, but should work with minor system EQ adjustment
for most arrays. The file produces -6dB points at 31 and 100
Hz, and produces good summation to a WL2102 array high-passed
with a 6th order 80Hz Butterworth or Linkwitz-Riley high-pass
filter. The 100Hz acoustic crossover point is achieved with
a 60Hz, 8th order Bessel low-pass filter, which has excellent
transient characteristics. Within reason, moving the Bessel
filter XX Hz up or down will move the acoustic crossover XX
Hz up or down (for an 80 Hz crossover, move the Bessel filter
down to 40Hz, for 120Hz move it to 80 Hz). |
|
MODULAR DESIGN SERIES VOICINGS
These files are compatible with QSC signal processing products
DSP-3, DSP-30, and DSP-4. |
|
MD-L115 |
This file optimizes the response of the MD-L115
low frequency cabinet for use with ModularDesign and AcousticDesign
loudspeakers. This configuration low passes the LF Cabinet at
91Hz for proper integration with loudspeakers. |
| MD-L118 |
This file optimizes the response of the MD-L118 low frequency
cabinet for use with ModularDesign and AcousticDesign loudspeakers.
This configuration low passes the LF Cabinet at 97Hz for proper
integration with loudspeakers. |
| MD-F122/64r |
This file optimizes the response of the MD-F122/64r loudspeaker
in biamp mode. |
| MD-F122/94r |
This file optimizes the response of the MD-F122/94r loudspeaker
in biamp mode. |
| MD-F122/124r |
This file optimizes the response of the MD-F122/124r loudspeaker
in biamp mode. |
| MD-F152/64r |
This file optimizes the response of the MD-F152/64r loudspeaker
in biamp mode. |
| MD-F152/94r
|
This file optimizes the response of the MD-F152/94r loudspeaker
in biamp mode. |
| MD-F152/124r
|
This file optimizes the response of the MD-F152/124r loudspeaker
in biamp mode. |
|
ISIS SERIES VOICINGS
These files are compatible with QSC signal processing products
DSP-3, DSP-30, and DSP-4. |
ISIS152M
Biamp fullrange V1 |
This file optimizes the response
of the ISIS 152M loudspeaker in biamp mode. |
ISIS152M
Biamp 100Hz High Pass V1 |
This file optimizes the response of the ISIS
152M loudspeaker in biamp mode when used in conjunction with
the ISIS 215PCM subwoofer. This configuration has a 100Hz
high pass filter in it for proper integration with the subwoofer. |
ISIS122M
Biamp fullrange V1 |
This file optimizes the response of the ISIS
122M loudspeaker in biamp mode. |
ISIS122M
Biamp 100Hz High Pass V1 |
This file optimizes the response of ISIS 122M
loudspeaker in biamp mode when used in conjunction with the
ISIS 215PCM subwoofer. This configuration has a 100Hz high
pass filter in it for proper integration with the subwoofer. |
ISIS102M
Biamp fullrange V1 |
This file optimizes the response of ISIS 102M
loudspeaker in biamp mode. |
ISIS102M
Biamp 100Hz High Pass V1 |
This file optimizes the response of ISIS 102M
loudspeaker in biamp mode when used in conjunction with the
ISIS 215PCM subwoofer. This configuration has a 100Hz high
pass filter in it for proper integration with the subwoofer. |
ISIS102W
Biamp fullrange V1 |
This file optimizes the response of ISIS 102W
loudspeaker in biamp mode. |
ISIS102W
Biamp 100Hz High Pass V1 |
This file optimizes the response of ISIS 102W
loudspeaker in biamp mode when used in conjunction with the
ISIS 215PCM subwoofer. This configuration has a 100Hz high
pass filter in it for proper integration with the subwoofer. |
ISIS215PCM
100 Hz Low Pass V2 |
This file optimizes the response of the ISIS
215PCM subwoofer for use with ISIS loudspeakers. This configuration
low passes the subwoofer at 100Hz for proper integration with
ISIS loudspeakers. |
|
ACE LOUDSPEAKER VOICINGS
These files are compatible with QSC signal processing products
DSP-3, DSP-30, and DSP-4. |
QSC
- ACE1250
Biamp Fullrange V1 |
This file optimizes the response
of the ACE 1250 for biamp, full range operation. |
QSC
- ACE1250
Biamp 100Hz High Pass V1 |
This file optimizes the ACE 1250 for biamp operation
with the ISIS 215PCM subwoofer. This configuration has
a 100Hz high pass filter in it for proper integration with the
subwoofer. |
QSC
- ACE1160
Biamp Fullrange v1 |
This file optimizes the ACE 1160AWR for biamp,
full range operation. (Note: this speaker has no internal
passive crossover) |
QSC
- ACE1160
Active 100Hz High Pass V1 |
This file optimizes the ACE 1160AWR for biamp
operation with the ISIS 215PCM subwoofer. This configuration
has a 100Hz high pass filter in it for proper integration with
the subwoofer. |
|
OTHER ACE LOUDSPEAKER VOICINGS
These files are compatible with QSC signal processing products
DSP-3, DSP-30, and DSP-4. |
QSC
- ACE550
Passive Fullrange V1 |
This file corrects and flattens the
response of the ACE 550 5.25" two-way loudspeaker. |
|
TOP
|
